so does the 20m x 4mm.
However the 3mm (inner dimension, 0.5mm wall) will kink too easy (same goes for the 2mm x 0.5mm and 1.5mm x 0.3mm wall).
Upon making our (shout out to Sylwia) first braid ... first observation (when using the 4mm inner x 6mm outter) is that the spacing on our prototype loom is too small (currently 14 mm, needs to be bigger ... perhaps around 18mm). Also ... each peg height is 5.5cm ... if it were longer (approx 8cm) the tubes would stay on easier
Final Facts:
5mm inner (@20m) took 40 seconds to empty
4mm inner (@20m) took 55 seconds to empty and 20 seconds to fill
No comments:
Post a Comment